Bracket Removal

Okay while I'm at it, I may as well post how to remove the brackets for the lights.

There are 4 screws on one side. The middle two are pretty easy but the ones on the end require you to use a thinner screwdriver for one and to remove the level adjuster for the other.

Here is the adjuster removed. It is pretty easy to remove the adjuster with a pair of pliers. Same goes for the other adjuster on the other side.

Removed and ready for the oven!

 

Hehe, sneak peak! Here I was testing the lights for the rotation. All looks well as the H4 holder was used to align the projector.